Dodge Ram II BR/BE (1994-2002)
Depending on the year of manufacture and body type, the attachment points may vary slightly.
-open the hood.
-from the side of the engine compartment, Unscrew the four nuts that secure the bumper brackets to the frame.
-in the wheel arches, unscrew the screws that secure the fender liner (if any).
-unscrew one nut on each side that attach the sides of the bumper to the wings.
-with an assistant, pull the bumper forward (look for the wires).
-disconnect the connectors from the electrical equipment (if any).
-disconnect electrical connectors.
-from the bottom side, unscrew three nuts on each side that secure the bumper amplifier brackets to the frame.
-with an assistant, pull the bumper back.