Dodge Neon I (1994-1999)
-open the hood.
-remove the grille.
-turn the wheels to the side.
-in the wheel wells, unscrew four screws on each side that secure the sides of the bumper.
-from the side of the engine compartment, unscrew the nuts that secure the bumper amplifier to the body.
-with an assistant, pull the bumper forward (look for the wires).
-disconnect the connectors from the electrical equipment (if any).
-open the trunk lid.
-in the opening of the trunk, Unscrew the six screws.
-in the wheel wells, Unscrew three screws on each side that secure the sides of the bumper.
-unscrew the two screws at the bottom of the bumper (spun up).
-with an assistant, pull the bumper back from the rails (look for the wires).
-disconnect the license plate lighting connectors.
How to remove the front and rear bumper Dodge Neon (2000-2005)