How to remove front and rear bumper Dodge Grand Caravan (2007-2020)
Dodge Grand Caravan V (2007-2020)
Depending on the year of manufacture and body type, the attachment points may vary slightly.
Front bumper
-open the hood.
-under the hood take out two pistons and Unscrew the two screws that secure the grille and the upper part of the bumper.
-at the bottom of the bumper take out the four pistons (inserted from the bottom up).
-turn the wheels to the side.
-in the wheel wells take out two pistons on each side that secure the fender liner (front).
-behind the fender liner, one screw on each side that secures the corners of the bumper to the fenders.
-with an assistant, release the latches in the wings (pull the corners towards you) and pull them forward (look for the wires).
-disconnect connectors from electrical equipment.
Rear bumper
-open the trunk lid.
-in the opening of the trunk, Unscrew the two screws and remove the taillights (when installing, note that the taillight mounts enter the body through the bumper).
-unscrew the four screws that secure the upper part of the bumper.
-in the wheel wells take out three pistons on each side that secure the sides of the bumper and fender liner.
-take out the four pistons from the bottom.
-with an assistant, release the latches in the wings and pull the bumper back (look behind the wires).
English 
Italiano 
Français 
русский 
Deutsch 
Español 
