How to remove the front and rear bumper Dodge Charger (2015-2022)
Dodge Charger LD VII (2015-2022)
Depending on the year of manufacture and body type, the attachment points may vary slightly.
Front bumper
-open the hood.
-under the hood we take out twelve caps (inserted from top to bottom) that secure the upper part of the bumper (pad) and two screws (hidden between the wing and the bumper).
-at the bottom of the bumper, unscrew the screws (spun up) that secure the protection.
-turn the wheels to the side.
-in the wheel arches we take out the caps that secure the fender liner (the entire front part).
-remove the fender liner to the side, unscrew two screws on each side (spun down) that secure the corners of the bumper to the wings.
-with an assistant, pull the bumper forward (look for the wires).
-disconnect connectors from electrical equipment.
Rear bumper
-open the trunk lid.
-in the trunk, take out the caps, unscrew the screws and release the side trim.
-for the skins, unscrew two nuts on each side and remove the rear lights (hold on the latches).
-wheel arches take out three pistons on each side that secure the fender liner (rear).
-move the fender liner to the side and Unscrew two screws on each side that secure the sides of the bumper.
-we release the latches in the wings (in the wheel arches you need to press the latch and pull the corners of the bumper towards you).
-we release the latches under the rear lights (pull up).
-with an assistant, gently pull the bumper back (look behind the wires).
English 
Italiano 
Français 
русский 
Deutsch 
Español 
