How to remove front and rear bumper Dodge Avenger (2007-2014)

Dodge Avenger II (2007-2014)

Depending on the year of the attachment points are slightly different.

Front bumper

-open the hood.

-under the hood take out the caps and remove the intake (if any).

-take out the rivets that secure the grille.

-depending on which side we will disassemble, wrenched the wheel.

-wheel arches take out the caps and removed the wheel arches (completely remove is not necessary).

-wheel arch liners Unscrew one screw on each side that attach the angles to the wings.

-perimeter of the lower part and pull out the caps and Unscrew the screws that secure protection.

-with the assistant pulls  the bumper with the clips in the wings (however, not to cut wires).

-remove the connectors from the lighting.

Rear bumper

-open the trunk lid.

-in the opening of the trunk, take out the clips that secure the upper part.

-Unscrew the screws from the bottom.

-in the wheel wells, Unscrew the screws and take out the rivets that attach the fender liner.

-Unscrew the screws holding the corners of the bumper to the wings.

-with the assistant pulls the bumper back, releasing of the latches in the wings.

-(if you have one) remove the connectors of electrical equipment.