Lexus RC I XC10 (2015-2024) RC 200t/300, RC 300h, RC 350, RC F.
Depending on the year of manufacture, the mounting locations may vary slightly.
How to remove the front bumper
-open the hood.
-under the hood, take out the thirteen pistons and remove the plastic trim (consists of two parts).
-under the trim, take out the four pistons and unscrew the three screws (twisted and inserted from top to bottom) that secure the upper part of the front bumper and the radiator grille.
-from the bottom, unscrew the eight screws and take out the two pistons (twisted and inserted from the bottom up) that secure the lower part.
-turn the wheels to the side.
-in the wheel arches, release the clamps that secure the fender liners (front part).
-move the fender liners to the side and unscrew one screw on each side (twisted from bottom to top) that secure the corners to the wings.
-release the latches in the wings (pull the corners of the bumper towards you).
-with an assistant, carefully pull the bumper forward (watch the wires).
-disconnect the connectors of the electrical equipment.
-in the trunk opening, take out two plugs (you need to pry them off with a flat object).
-under the plugs, unscrew the two screws that secure the upper part of the rear bumper.
-from the bottom we unscrew and take out the six pistons that secure the lower part and the fender liners.
-in the wheel arches we take out the pistons and release the fender liners (rear part) from the clamps.
-move the fender liners to the side and unscrew one screw on each side (twisted from bottom to top) that secure the corners to the wings (you will need a socket head with an extension).
-release the latches in the wings (pull the corners toward you).
-release the latches under the rear lights.
-release the latches in the trunk opening.
-with an assistant, carefully pull the bumper back.
-disconnect the connectors of the electrical equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español 
