-
-
-
Lexus ES VII XZ10 (2019+) ES 200, ES 250, ES 300h, ES 350.
Depending on the year of manufacture, the mounting locations may vary slightly.
How to remove the front bumper
-open the hood.
-under the hood, take out the eight pistons (inserted from top to bottom) and remove the plastic trim (radiator protection).
-under the trim, unscrew the four bolts that secure the upper part of the front bumper.
-from the bottom, unscrew the eight screws (twisted from bottom to top) that secure the engine compartment protection.
-turn the wheels to the left or right.
-in the wheel arches, unclip three latches on each side and release the fender liners (front part).
-move the fender liners to the side and unscrew one screw on each side (twisted from bottom to top) that secure the corners to the wings.
-release the latches in the wings (pull the corners toward you).
-with an assistant, carefully pull the bumper forward (watch the wires).
-disconnect the connectors of the electrical equipment.
How to remove the rear bumper
-open the trunk lid.
-near the rear lights, remove the plastic covers (held on by latches).
-under the trims, unscrew one screw on each side that secures the upper part of the bumper.
-from the bottom we take out nine pistons (inserted from bottom to top) that secure the lower part.
-in the wheel arches we take out the pistons and release the clamps that secure the fender liners (rear part).
-move the fender liners to the side and unscrew one screw on each side (twisted from bottom to top) that secure the corners to the wings.
-release the latches in the wings (pull the corners toward you).
-with an assistant, pull the bumper back (watch the wires).
-disconnect the connectors of the electrical equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español