Lexus ES VI XV60 (2013-2018) ES 200, ES 250, ES 300h, ES 350.
How to remove the front bumper
-open the hood.
-under the hood, take out the nine pistons (inserted from top to bottom) and remove the trim.
-under the trim we take out the five pistons (inserted from top to bottom) that secure the upper part of the front bumper.
-at the bottom, unscrew the six screws (twisted from bottom to top).
-turn the wheels to the left or right.
-in the wheel arches we take out the two pistons and release the two latches (you need to turn them ninety degrees with a flat screwdriver) that secure the fender liners (the front part).
-move the fender liners to the side and unscrew one screw on each side (twisted from bottom to top) that secure the corners to the wings.
-release the latches in the wings (pull the corners toward you).
-release the latches under the headlights (pull towards yourself).
-with an assistant, carefully pull the bumper forward (watch the wires).
-on the right side, in the direction of travel, release the electrical connectors.
How to remove the rear bumper
-open the trunk lid.
-in the trunk opening, use a flat screwdriver to release it from the latches and take out the two plugs.
-under the plugs, Unscrew the two screws that secure the upper part of the rear bumper.
-from the bottom, unscrew the seven screws and take out the four pistons that secure the lower part.
-in the wheel arches we release the fender liners (rear part).
-move the fender liners to the side and unscrew one screw on each side (twisted from bottom to top) that secure the corners to the wings.
-release the latches in the wings (pull the corners of the bumper towards you).
-release the latches under the rear lights.
-with an assistant, pull the bumper back (watch the wires).
-disconnect the connectors of the electrical equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español 
