Depending on the year of release of the attachment can vary.
Front bumper
-open the hood and remove the rivets that secure the upper part.
-wrenched the wheel to the left or right side depending on which side we will analyze first.
-wheel arches Unscrew the screws that attach the fender liner.
-on the perimeter in the bottom part Unscrew the screws and take out the caps (twisted and inserted from the bottom up).
-assistant exempt the corners of the bumper from the clips in the wings and remove from the guides themselves.
-remove the connector from the fog lamp (if any).
-remove connector from the PDC (if any).
-if you have headlight washers, disconnected the hoses (so the liquid will not escape on earth, should prepare a special container).
Rear bumper
-open the trunk lid.
-in the opening, remove the pad (rests on the latch).
-under the pickguard, Unscrew the screws.
-Unscrew the screws at the bottom (spun up).
-Unscrew the screws in the wheel arches (so as not to remove the wheels easier to turn a ratchet with a nozzle).
-assistant free the bumper from the clips in the wings and under the tail lamps.
-remove the bumper from the guides themselves.
-remove connector from the PDC (if any).