Front bumper

-wrenched the wheel to the left or right side depending on which side we will analyze first.

-in the wheel wells, Unscrew the screws and take out the rivets that attach the fender liner to the bumper.

-attach the fender liner to the side and Unscrew one screw on each side (spun upwards) holding the corners to the wings.

-under the hood remove the cover.

-under the panel and pull out the caps and Unscrew the screws (twisted and inserted top to bottom) that secure the upper part.

-around the bottom part Unscrew the screws (spun up).

-assistant exempt corners of the latches in the wings and remove the bumper from the guides themselves.

-remove the connector from the fog lamp (if any).

-remove connector from the PDC (if any).

the attachment of the front bumper Opel AGILA B (after 2008)

the scheme of fastening of the front bumper Opel AGILA B (after 2008)

Rear bumper

⇒Tips for removing bumpers and how to avoid breaking anything..⇐

-open the trunk lid.

-in the opening of the trunk twist.

-in the wheel wells, Unscrew the screws and take out the rivets that attach the fender liner to the bumper.

-on the perimeter in the bottom part Unscrew the screws (spun up).

-assistant free the bumper from the clips in the wings and under the tail lights, remove the bumper itself.

-remove connector from the PDC (if any).

-remove the connectors from the light plate.

the attachment of the rear bumper Opel AGILA B (after 2008)

diagram of rear bumper Opel AGILA B (after 2008)

 

How to remove front and rear bumper Opel AGILA A (2000 – 2008)