Opel Meriva B (2010-2017): How to Remove the Bumpers.

The Opel Meriva B is a compact minivan that became a true hit among family cars thanks to its practical design and innovative solutions. In different countries, this model is known under different names, making it a truly international vehicle. For example, in the UK, it can be found under the Vauxhall Meriva brand, as Vauxhall is the British subsidiary of Opel. In Australia and some other countries, the model was sold as the Holden Meriva, further emphasizing its global popularity.

Model Code and Body Type

The Opel Meriva B has the factory code S10, distinguishing it from the first generation (Meriva A, code X03). It is a five-door minivan with front-wheel drive, combining compact dimensions and a spacious interior. The Meriva B's body is designed in a "monovolume" style, ensuring optimal use of interior space. One of the key features of the model is the rear doors with the FlexDoors system, which open against the direction of travel, making it easier for passengers to enter and exit.

Bumper Material: Polypropylene, ethylene-propylene-diene terpolymer, 18% mineral filler. Marking >PP+EPDM-M18<

Tools Needed for Removal:

• Flathead screwdriver.

• Ratchet or wrench.

• Clip removal tool.

• Set of Torx bits or keys.

How to Remove the Front Bumper

1. Lift and secure the hood.

2. From the top of the bumper, unscrew six screws that are screwed in from top to bottom.

3. Move to the bottom. Under the car, remove three clips and loosen two long bolts that secure the front collision limiter by a few turns.

4. Now the sides. In the wheel arches, unscrew three screws on each side that secure the fender liners and corners to the plastic brackets in the fenders.

5. Release the clips in the fenders by pulling them toward you.

6. Release the clips under the headlights.

7. With the help of an assistant, remove the bumper by pulling it forward, paying attention to the wires.

8. Disconnect the connectors from the temperature sensor, fog lights, and parking assist sensors (if installed).

9. The bumper is removed. Installation is done in reverse order.

How to Remove the Rear Bumper

1. Lift the tailgate.

2. In the side trim of the trunk, open the covers to access the back of the taillights.

3. Under the covers, disconnect the power connectors, unscrew two plastic nuts on each side, and remove the taillights.

4. Move to the wheel arches. To avoid removing the wheels, use a ratchet with a Torx bit. Unscrew three screws on each side that secure the rear part of the fender liners and the corners of the bumper to the brackets in the fenders.

5. Release the clips in the fenders by grabbing the corner and gently pulling toward you.

6. Release the clips under the taillights using a flathead screwdriver.

7. Release the clips in the tailgate opening. If they don't come out, lift the tailgate seal and press the clips with a flathead screwdriver.

8. Remove the bumper by pulling it backward. Be careful not to damage the wires.

9. Disconnect the connectors from the parking sensors, if installed.

Description and Features

The Opel Meriva B was introduced in 2010 and immediately attracted attention with its unusual design and functionality. The car offered a spacious interior with adjustable seats, allowing the space to be transformed according to the needs of passengers or luggage. The interior capacity is up to five people, with split rear seats that can be moved, tilted, or folded.

An interesting feature of the Meriva B is the FlexSpace system, which allows for easy reconfiguration of the interior. For example, the rear seats can be moved forward to increase trunk space or folded completely, turning the car into a small van.

Interesting Facts

• FlexDoors: A unique rear door system that became the hallmark of the Meriva B. It not only facilitates access to the interior but also makes the car safer, especially in tight parking areas.

• Efficiency: The Meriva B was offered with a wide range of engines, including diesel and gasoline options, as well as the Start/Stop system, making it one of the most efficient minivans in its class.

• Design: The car was developed under the direction of Mark Adams, who drew inspiration from the Opel Meriva Concept 2008. Its flowing lines and "smiling" grille gave the model a friendly and modern appearance.

• Safety: The Meriva B received high ratings in Euro NCAP crash tests, confirming its status as a reliable family car.

The Opel Meriva B is not just a car but a true "family assistant" that combines practicality, comfort, and innovation. Its unique features and global popularity make it one of the most memorable minivans of its generation.