-
-
-
SEAT Leon IV (2020-2023)
Depending on the year of manufacture, the attachment points may vary slightly.
Front bumper
-open the hood.
-under the hood, remove the lining.
-under the trim, unscrew the screws that secure the upper part of the bumper.
-unscrew the screws from the bottom (spun up) that secure the bottom.
-turn the wheels to the side.
-in the wheel wells, unscrew three screws on each side that secure the sides of the bumper and fender liner.
-unscrew one screw on each side that attach the corners to the wings.
-unscrew the two screws in the lower grille (if any).
-release the clips in the wings (pull the corners towards you).
-we release the clips under the hood.
-with an assistant, gently pull the bumper forward (look behind the wires).
-disconnect electrical connectors.
Rear bumper
-open the trunk lid.
-remove the rear lights.
-in the wheel wells, unscrew three screws on each side that secure the fender liner (rear).
-onscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-onscrew the screws that secure the bottom of the bumper (spun up).
-we release the latch in the wings (pull the corners of the bumper towards you).
-we release the latches and clips under the rear lights.
-with an assistant, pull the rear bumper back (look for the wires).
-disconnect electrical connectors.
English 
Italiano 
Français 
русский 
Deutsch 
Español