SEAT Arona I (2017-2023)
Depending on the year of manufacture, the attachment points may differ.
-open the hood.
-under the hood take out the caps and remove the trim over the grille.
-under the trim, unscrew the screws that secure the grille (upper part of the bumper).
-unscrew the screws from the side of the bottom that secure the lower part.
-turn the wheels to the side.
-in the wheel wells, unscrew the screws that secure the fender liner and bumper corners to the wings.
-we release the clips in the wings.
-with an assistant, gently pull the bumper forward (look behind the wires).
-disconnect electrical connectors (if any).
-open the trunk lid.
-remove the rear lights.
-in the wheel wells, unscrew the screws that secure the fender liner (rear).
-unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-unscrew the screws from the bottom.
-we release the latch in the wings (pull the corners of the bumper towards you).
-we release the latches under the rear lights.
-with an assistant, pull the rear bumper back (look for the wires).
-disconnect electrical connectors.