How to remove front and rear bumper SEAT Ibiza MK4 (after 2008)
Front bumper
Depending on the year and model of the attachment points are slightly different.
-open the hood and remove the rivets that attach the upper part of the bumper.
-wrenched the wheel to the left or right side depending on which side we will analyze first.
-wheel arches Unscrew the screws that attach the fender liner.
-move the wing flaps to the side and Unscrew one screw on each side in the corners (spun up).
-Unscrew the screws around the perimeter in the lower part( spun up).
-with the aide of tear corners with latches and pulls the bumper from the guides themselves.
-remove connector from the PDC (if any).
-remove the connector from the fog lamp.
-if you have headlight washers, disconnect the hose from the pump to the washer fluid reservoir. The liquid leaking on the ground, you need to prepare a suitable container.
Rear bumper
Depending on the year and model of the attachment points are slightly different.
-in the trunk, Unscrew the clamps and remove the tail lights.
-under the rear lights Unscrew two screws on each side (twisted upside down).
-Unscrew one screw on each side in the doorway of the trunk.
-Unscrew the screws in the wheel arches that secure the wheel arches (not to remove the wheel, remove ratchet with a nozzle).
-move the wing flaps to the side and Unscrew one screw on each side (twisted up) (may not be).
-Unscrew the two screws that attach the bottom skirt (may not be).
-Unscrew the screws around the perimeter in the bottom (spun up).
-with the aide of tear corners with latches and pulls the bumper from the guides themselves.
-remove the electrical connector license plate light.
English 
Italiano 
Français 
русский 
Deutsch 
Español 
