Front bumper

Depending on the model year and version of the model the attachment is different.

-Unscrew the four screws under the hood.

-remove the top pads and the bottom grate (you need to gently pry the edge with a screwdriver and rip the snaps).

-Unscrew under overlays and grille screws.

-Unscrew the three screws in the bottom of the bumper (spun up).

-wrenched the wheel to the left or right side depending on which side we will analyze first.

-wheel arches Unscrew the screws that attach the fender liner.

-with the assistant pulls the bumper from the guides themselves.

-remove connector from the PDC (if any).

-remove the connector from the fog lamp.

mounting locations for front bumper SEAT Cordoba (up to 2003)

the scheme of fastening of the front bumper SEAT Cordoba (up to 2003)

the scheme of fastening of the front bumper SEAT Cordoba (up to 2003)

Rear bumper

Depending on the model year and version of the model the attachment is different.

-open the boot lid and Unscrew the screws in the opening.

-Unscrew the screws in the wheel arches that secure the wheel arches (not to remove the wheel, remove ratchet with a nozzle).

-move the wing flaps to the side and Unscrew one screw on each side (twisted up) (may not be).

-Unscrew the screws around the perimeter in the bottom (spun up).

-with the assistant pulls the bumper from the guides themselves.

-remove connector from the PDC (if any).

the attachment of the rear bumper SEAT Cordoba (up to 2003)

diagram of rear bumper SEAT Cordoba (up to 2003)