SEAT Ibiza V (2017-2023)
Depending on the year of manufacture, the attachment points may vary slightly.
Front bumper
-open the hood.
-under the hood take out the four pistons that secure the grille.
-under the trim, unscrew the screws that secure the grille (upper part of the bumper).
-around the perimeter of the lower part, unscrew the screws (spun up) that secure the bottom of the bumper.
-turn the wheels to the side.
-in the wheel wells, unscrew the screws that secure the sides of the bumper.
-we release the clips in the wings.
-we release the clips in the front.
-with an assistant, gently pull the bumper forward (look behind the wires).
-disconnect electrical connectors.
Rear bumper
-open the trunk lid.
-in the wheel wells, unscrew the screws that secure the fender liner (rear).
-unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-unscrew the screws that secure the bottom of the bumper (spun up).
-we release the latch in the wings (pull the corners of the bumper towards you).
-we release the latches under the rear lights.
-with an assistant, pull the rear bumper back (look for the wires).
-disconnect electrical connectors.