Front bumper
-open the hood.
-under the hood take out the six rivets that attach the upper part.
-(if you have one) flat head screwdriver to hook and remove the turn signal in the pads.
-(if any), Unscrew the nut and remove the headlight wipers.
-flat-head screwdriver to hook lining (full lining is not removed, you need to access bolts).
-under the covers, Unscrew the bolts.
-Unscrew the two bolts in the lower grille (if any).
-wrenched the wheel to the side.
-in the wheel wells of the drilled caps (if the bumper had not filmed) and Unscrew one screw.
-in the bottom part pulls out with two clips (inserted from the bottom up).
-with an assistant, carefully release the latches in the wings.
-pulls the bumper forward (don't want to break the wires).
-remove the connectors from the equipment (if any).
Rear bumper
-open the trunk lid.
-in the trunk, Unscrew the screws and take out the caps, remove the back and side plating.
-switched antenna connector.
-for sheathing, through the holes, Unscrew the nuts (depending on year, 4 or 6).
-wheel arches and the bottom of the drilled rivets (if the bumper had not starred)
-with an assistant, carefully release the latches in the wings.
-pulls back bumper (don't want to break the wires).
-snap together the connectors of the equipment (if any).
How to remove front and rear bumper Volvo S80 (2006-2016)