Suzuki Wagon R+ I (1997-2000)
Front bumper
-open the hood.
-under the hood take out the caps and unscrew the screws that secure the upper part of the bumper.
-from the bottom, unscrew the screws (spun up).
-turn the wheels to the side.
-in the wheel wells, unscrew one screw on each side that attach the corners of the bumper to the wings.
-unscrew the four bolts from the side of the engine compartment that secure the brackets to the body.
-with an assistant, gently pull the bumper forward (look behind the wires).
-on the left side in the direction of travel, disconnect the electrical connector.
Rear bumper
-open the trunk lid.
-in the opening of the trunk, unscrew the four screws.
-in the wheel wells, unscrew the screws that attach the sides of the bumper to the wings and fender liner.
-from the bottom, unscrew the screws (spun up).
-with an assistant, pull the rear bumper back (look for the wires).
-disconnect electrical connectors.
How to remove front and rear bumper Suzuki Wagon R+ (2000-2008)