How to remove front and rear bumper Suzuki SX4 (2013-2022)

Suzuki SX4 II S-Cross (2013-2022)

Depending on the year of manufacture, the attachment points may vary slightly.

Front bumper

-open the hood.

-take out the caps and remove the trim over the grille (holds on latches).

-under the trim, unscrew the four screws that secure the upper part of the bumper (radiator grille).

-from the bottom, unscrew the four screws and take out the six caps that secure the bottom.

-turn the wheels to the side.

-in the wheel arches, we take out the caps and release the lining of the arches from the bumper (they are held on by latches, pull the bottom towards you).

-for the overlays, unscrew one screw on each side that secures the corners of the bumper to the wings.

-we release the sides of the bumper from the latches in the wings (pull the corners towards you).

-we release the upper part of the latches under the hood.

-with an assistant, gently pull the bumper forward (look behind the wires).

-disconnect electrical connectors (if any).

rear bumper

-open the trunk lid.

-in the opening of the trunk, unscrew the two screws.

-in the wheel arches we take out the caps that secure the lining of the arches and fender liner (rear).

-we release the lining of the arches from the latches in the bumper (pull the bottom towards you).

-for the overlays, unscrew one screw on each side that secures the corners of the bumper to the wings.

-from the bottom, unscrew the two screws and take out the four pistons.

-we release the latch in the wings (pull the corners of the bumper towards you).

-we release the latches under the rear lights.

-with an assistant, pull the rear bumper back (look for the wires).

-disconnect electrical connectors (if any).

\

How to remove front and rear bumper Suzuki SX4 (2006-2013)