-open the hood.
-under the hood take out the rivets that secure the upper part of the bumper.
-Unscrew the screws (spun up) that secure the lower part.
-wrenched the wheel depending on which side we understand.
-in the wheel wells, Unscrew the screws holding the wheel arches and bumper corners to the wings.
-with the assistant gently pulls the bumper forward (don't want to break the wires).
-remove the connectors from the equipment (if any).
-open the back door.
-in the opening of the trunk Unscrew two screws on each side and pull themselves rear lights.
-under the rear lights Unscrew one screw on each side.
-Unscrew the three screws in the tailgate opening that secure the upper part.
-around the bottom part Unscrew the screws (spun up).
-wheel arches Unscrew the screws that attach the fender liner.
-Unscrew one screw on each side that attach the bumper corners to the wings.
-with the assistant gently pulls the bumper back from the rails.
-snap together the connectors of the equipment (if any).