Front bumper
-open the hood.
-under the hood, Unscrew the three screws that secure the upper part of the bumper.
-around the bottom part Unscrew the screws (spun up).
-wrenched the wheel depending on which side we understand.
-in the wheel wells, Unscrew the screws and peel the fender liner.
-for wheel arch liners Unscrew each side one screw (spun upwards) holding the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners themselves).
-with the assistant gently pulls the bumper forward (don't want to break the wires).
-remove the connectors from the equipment (if any).
Rear bumper
-open the trunk lid.
-in the opening of the trunk, Unscrew the two screws.
-from the trunk, Unscrew the nuts and remove the tail lights.
-under the rear lights Unscrew one screw on each side.
-around the bottom part Unscrew the screws and take out the caps (twisted and inserted from the bottom up).
-wheel arches take out the rivets that attach the fender liner.
-Unscrew one screw on each side holding the bumper corners to the wings.
-we release the latch in the wings (pull the corners of the bumper itself) and under the rear lights.
-with the assistant gently pulls the bumper back.
-snap together the connectors of the equipment (if any).