Suzuki Baleno I (Esteem) (1995-2002)
Depending on the year of manufacture, the attachment points may differ.
Front bumper
-open the hood.
-under the hood take out the caps that secure the grille.
-from the bottom, unscrew the screws (spun up) that secure the bottom.
-turn the wheels to the side.
-in the wheel wells, unscrew the screws that secure the fender liner (front).
-unscrew one screw on each side that attach the corners of the bumper to the wings.
-from the side of the engine compartment, unscrew the four bolts that secure the metal bumper reinforcement to the body.
-with an assistant, gently pull the bumper forward (look behind the wires).
-disconnect electrical connectors (if any).
Rear bumper
-open the trunk lid.
-(if any) in the opening of the trunk, unscrew the two screws.
-in the wheel wells, unscrew the screws that secure the fender liner (rear).
-for the fender liner, unscrew one screw on each side that secures the corners of the rear bumper to the wings.
-from the bottom, unscrew the screws that secure the lower part of the bumper.
-unscrew the four bolts that secure the bumper amplifier brackets to the body.
-with an assistant, pull the rear bumper back (look for the wires).
-disconnect electrical connectors (if any).
How to remove front and rear bumper Suzuki Baleno (2015-2022)