Depending on the model year and body type of attachment may vary.

Front bumper

-open the hood.

-under the hood, take out the clips that secure the grille.

-released from latches at the bottom and remove the grille.

-under the grille, take out the caps.

-Unscrew the three bolts (spun up) that secure the lower part.

-wrenched the wheel depending on which side we understand.

-wheel arches Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-with the assistant gently pulls the bumper forward (don't want to break the wires).

-remove the connectors from the equipment (if any).

the scheme of fastening of the front bumper Suzuki Grand Vitara 2 (XL-7) (1998-2005)

the scheme of fastening of the front bumper Suzuki Grand Vitara 2 (XL-7) (1998-2005)

Rear bumper

-open the trunk lid.

-in the opening of the trunk, take out the clips that secure the upper part.

-around the bottom part Unscrew the four screws (spun up).

-wheel arches Unscrew the screws.

-with the assistant gently pulls the bumper back.

-snap together the connectors of the equipment (if any).

diagram rear bumper Suzuki Grand Vitara 2 (XL-7) (1998-2005)