How to remove the front and rear bumper Suzuki Ignis (2016-2023)
Suzuki Ignis III (2016-2023)
Depending on the year of manufacture, the attachment points may differ.
Front bumper
The bumper is removed without the grille.
-from the bottom, unscrew the three screws and take out the six caps that secure the lower part of the bumper.
-turn the wheels to the side.
-wheel arches take out two pistons on each side that secure the fender liner.
-for the fender liner, unscrew the screws (spun up) that secure the corners of the bumper to the wings.
-we release the sides of the bumper from the latches in the wings (pull the corners towards you).
-we release the upper part of the latches in the grille.
-with an assistant, gently pull the bumper forward (look behind the wires).
-disconnect electrical connectors (if any).
Rear bumper
-open the trunk lid.
-in the opening of the trunk, unscrew the three screws that secure the top.
-in the wheel arches, take out the caps that secure the fender liner (rear) and unscrew one screw on each side that attach the corners of the bumper to the wings.
-from the bottom, take out the caps and unscrew the two screws.
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the rear bumper back (look for the wires).
English 
Italiano 
Français 
русский 
Deutsch 
Español 
