How to remove the front and rear bumper Suzuki Celerio (2014-2023)

Suzuki Celerio II (2014-2023)

Front bumper

The bumper is removed along with the grille.

-open the hood.

-under the hood, unscrew the two screws and take out the two pistons that secure the grille.

-from the bottom we take out eight caps (inserted from the bottom up) that attach the lower part to the fender liner and protection.

-unscrew the screws and remove the license plate together with the frame.

-for the license plate, unscrew the two screws.

-turn the wheels to the side.

-unscrew one screw on each side that attach the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners of the front bumper towards you).

-with an assistant, gently pull the bumper forward (look behind the wires).

-disconnect electrical connectors (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, unscrew the three screws and take out two pistons.

-in the wheel arches, take out the caps that secure the fender liner (rear) and unscrew one screw on each side that attach the corners of the rear bumper to the wings.

-from the bottom take out the caps.

-we release the latch in the wings (pull the corners of the bumper towards you).

-we release the latches under the rear lights.

-with an assistant, pull the rear bumper back (look for the wires).

-disconnect the connectors for the license plate lighting and parking sensors (if any).