Depending on the model year and body type of attachment may vary.

Front bumper

-open the hood.

-under the hood, take out the four clips that secure the upper part of the bumper and the four that attach the radiator grille.

-pull up the grille.

-in the opening of the grille, Unscrew the two screws.

-Unscrew the screws and take out the caps (twisted and inserted from the bottom up) that secure the lower part.

-wrenched the wheel depending on which side we understand.

-wheel arches take out the rivets and removed the fender liner.

-attach the fender liner to the side and Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-with an assistant, carefully release the latches in the wings (pull towards you).

-pulls the bumper forward (don't want to break the wires).

-remove the connectors from the equipment (if any).

the attachment of the front bumper Suzuki Grand Vitara 3(Escudo) (2005-2016)

the scheme of fastening of the front bumper Suzuki Grand Vitara 3 (Escudo) (2005-2016)

Rear bumper

-open the trunk lid.

-in the opening of the trunk, Unscrew the screws and take out the rivets that secure the upper part.

-around the bottom part Unscrew the screws (spun up).

-wheel arches Unscrew the screws that attach the fender liner.

-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-with an assistant, carefully release the latches in the wings (pull towards you).

-pulls the bumper back.

-snap together the connectors of the equipment (if any).

the attachment of the rear bumper Suzuki Grand Vitara 3 (Escudo) (2005-2016)

diagram rear bumper Suzuki Grand Vitara 3 (Escudo) (2005-2016)