How to remove front and rear bumper Suzuki Alto (1998-2004)

Suzuki Alto V (HA12) (1998-2004)

Depending on the year of manufacture, the attachment points may vary slightly.

Front bumper

-open the hood.

-under the hood, unscrew the screws that secure the upper part of the bumper.

-from the bottom, unscrew the screws (spun up) that secure the bottom.

-turn the wheels to the side.

-in the wheel arches, we release the fender liner (front).

-remove the fender liner to the side and unscrew one screw on each side that attach the corners of the bumper to the wings.

-from the side of the engine compartment, unscrew the bolts that secure the front bumper brackets to the body.

-with an assistant, gently pull the bumper forward (look behind the wires).

-disconnect electrical connectors (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, Unscrew the screws.

-in the wheel wells, unscrew the screws that secure the fender liner (rear).

-unscrew one screw on each side that attach the corners of the rear bumper to the wings.

-at the bottom of the bumper take out the caps.

-remove the license plate along with the frame.

-behind the license plate, unscrew the two bolts.

-with an assistant, pull the rear bumper back (be careful not to break the wires).

-disconnect electrical connectors.

How to remove front and rear bumper Suzuki Alto (1994-1998)

How to remove front and rear bumper Suzuki Alto (2009-2014)