How to remove front and rear bumper Suzuki Baleno (2015-2022)

Suzuki Baleno II (2015-2022)

Front bumper

-open the hood.

-under the hood, unscrew the screws (spun down) that secure the top.

-from the bottom, unscrew the screws (spun up) that secure the bottom.

-turn the wheels to the side.

-in the wheel arches, we release the fender liner (front).

-for the fender liner, unscrew one screw on each side that attach the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners of the front bumper towards you).

-with an assistant, gently pull the bumper forward (look behind the wires).

-disconnect electrical connectors (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, unscrew the two screws.

-in the wheel arches, unscrew the screws that secure the fender liner (rear) and the corners of the rear bumper to the wings.

-from the bottom, unscrew the screws (spun up).

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the rear bumper back (look for the wires).

-disconnect the connectors for the license plate lighting and parking sensors (if any).

How to remove front and rear bumper Suzuki Baleno (1995-2002)