Depending on the year of release of the attachment can vary.
-open the hood.
-under the hood, take out the clips that secure the grille and the upper bumper section.
-Unscrew the screws and take out the caps (twisted and inserted from the bottom up) that secure the lower part.
-wrenched the wheel depending on which side we understand.
-in the wheel wells, Unscrew the screws and peel the fender liner.
-Unscrew one screw on each side that attach the bumper corners to the wings.
-with the assistant gently pulls the bumper forward (don't want to break the wires).
-remove the connectors from the equipment (if any).
-open the trunk lid.
-in the opening of the trunk, Unscrew the four screws
-around the bottom part Unscrew the screws (spun up).
-wheel arches Unscrew the screws that attach the fender liner.
-Unscrew one screw on each side holding the bumper corners to the wings.
-with the assistant gently pulls the bumper back from the rails.
-snap together the connectors of the equipment (if any).