-open the hood.
-under the hood, Unscrew the four screws that secure the upper part of the bumper.
-around the bottom part Unscrew the eight screws (spun up).
-wrenched the wheel to the side.
-wheel arches, peel the fender liner.
-attach the fender liner to the side and Unscrew each side one screw that secures the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners themselves).
-with the assistant gently pulls the bumper forward (don't want to break the wires).
-remove the connectors from the equipment (if any).
-open the trunk lid.
-in the corners of the opening of the trunk, Unscrew the two screws.
-at the bottom, Unscrew the two screws and take out the two pistons.
-wheel arches pulled three pistons on each side and removed the fender liner.
-Unscrew the screws holding the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners of the bumper itself) and under the rear lights.
-with the assistant gently pulls the bumper back.
-snap together the connectors of the equipment (if any).