How to remove front and rear bumper SKODA FELICIA

Front bumper

Depending on the model year and version of the attachment may vary slightly.

-up to model 98 remove the turn signal and Unscrew the mounting screws of the grille. Unscrew the screws under the hood and remove the grille.

-in models after ' 98, Unscrew the screws and remove the trim strips between the headlights and bumper.

-in the opening between the headlamps at the corners Unscrew one nut on each side.

-from under the car, Unscrew the screws attaching the bumper to the body.

-Unscrew the wheel to the left or right side, depending on which side of the bed will be dismantled.

-wheel arches Unscrew the screws that attach the fender liner to .

-move the lockers aside and weaken screws of fastening of supports and pulls the bumper in front.

-remove the connectors from the fog lights (if any).

-if you have headlight washers, disconnect the hose and plug the cap to the reservoir was leaking fluid.

Rear bumper

Depending on the model year and version of the attachment may vary slightly.

-open the tailgate the window, remove the cap and Unscrew the four nuts.

-Unscrew the screws around the perimeter in the bottom (spun up).

-in the wheel wells, Unscrew the screws holding the wheel arch liners (to remove the wheels, remove the ratchet with a nozzle).

-for wheel arch liners Unscrew one screw on each side that attach the angles to the wings.

-with the assistant pulls the bumper the guide itself.