Skoda Fabia NJ Mk3 (2014-2021)

Depending on the year of manufacture and body type, the attachment points may vary slightly.

Front bumper

-open the hood.

-under the hood, unscrew the four screws that secure the upper part of the bumper (radiator grille).

-around the perimeter of the lower part, unscrew the screws (spun up) that secure the engine protection and fender liner.

-turn the wheels to the side.

-in the wheel wells, unscrew two screws on each side that secure the fender liner (front).

-move the fender liner to the side and unscrew two screws on each side (spun down) that secure the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper forward (look for the wires).

-disconnect electrical connectors.

front bumper attachment points Skoda Fabia NJ Mk3 (2014-2021)

Front bumper mounting scheme Skoda Fabia NJ Mk3 (2014-2021)

 

 

Rear bumper (Combi, hatchback)

-open the trunk lid.

-in the wheel wells, unscrew two screws on each side that secure the fender liner (rear).

-move the fender liner to the side and unscrew one screw on each side that attach the corners of the bumper to the wings.

-on the perimeter of the lower part of the bumper, unscrew the screws (spun up).

-we release the latch in the wings (pull the corners of the bumper towards you).

-we release the latches under the rear lights.

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors (if any).

rear bumper mounting points Skoda Fabia NJ Mk3 (2014-2021)

rear bumper mounting points Skoda Fabia NJ Mk3 (2014-2021)

rear bumper mounting points Skoda Fabia NJ Mk3 (2014-2021)

Rear bumper mounting scheme Skoda Fabia NJ Mk3 (2014-2021)