Skoda Octavia IV (A8) (2019+)

Front bumper

-open the hood.

-under the hood, unscrew the four screws (spun down) that secure the grille trim (do not pull out the caps).

-around the perimeter of the lower part, unscrew the eight screws (spun up) that secure the engine protection and fender liner.

-turn the wheels to the side.

-in the wheel wells, unscrew the screws that secure the fender liner (front).

-move the fender liner to the side and unscrew one screw on each side (spun down), unscrew the two plastic nuts on each side (spun up) that attach the corners of the bumper to the wings.

-we release the clips under the hood.

-with an assistant, release the clips in the wings and pull the bumper forward (look behind the wires and hoses).

-disconnect electrical connectors.

-(if any) disconnect the headlight washer hoses.

attachment points of the front bumper Skoda Octavia IV (A8) (2019+)

Front bumper mounting scheme Skoda Octavia IV (A8) (2019+)

 

Rear bumper

-open the trunk lid.

-around the perimeter of the lower part of the bumper, unscrew ten screws (spun up).

-in the wheel wells, unscrew the screws that secure the fender liner (rear).

-for the fender liner, unscrew one screw on each side that attach the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-we release the latches under the rear lights and in the opening of the trunk.

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors.

rear bumper attachment points Skoda Octavia IV (A8) (2019+)

Rear bumper mounting scheme Skoda Octavia IV (A8) (2019+)