Front bumper

Depending on the model year and version of the attachment may vary slightly.

-open the hood, Unscrew the three screws in front of the radiator (twisted upside down).

-Unscrew the screws around the perimeter at the bottom of the bumper (spun up).

-Unscrew the wheel to the left or right side, depending on which side will parse the first.

-wheel arches Unscrew the screws that attach the fender liner.

-move the wing flaps to the side and Unscrew one screw on each side (spun upwards) holding the corners to the wings.

-pulls the bumper from the guides themselves.

-remove connector from the PDC (if any).

-if you have fog lights, remove the connector.

-if you have headlight washers, disconnect the hose and plug the cap to the reservoir was leaking fluid.

the attachment of the front bumper SKODA SUPERB 1 (B5)

scheme of fastening of front bumper SKODA SUPERB 1 (B5)

Rear bumper

Depending on the model year and version of the attachment may vary slightly.

-in the trunk remove the side panels (need to access the rear part of the rear lights).

-under coverings Unscrew three nuts on each side and remove the tail lights.

-Unscrew the screws under the rear lights.

-Unscrew the screws in the opening of the trunk (twisted upside down).

-Unscrew the screws at the bottom (spun up).

-Unscrew the screws in the wheel arches (not to remove the wheel, remove ratchet with a nozzle).

-with the assistant pulls the bumper from the guides themselves.

-remove connector from the PDC (if any).

the attachment of the rear bumper SKODA SUPERB 1 (B5)

scheme of fastening of a back bumper SKODA SUPERB 1 (B5)