How to remove front and rear bumper Skoda Karoq

Skoda Karoq I (2017+)

Front bumper

-open the hood.

-under the hood, unscrew the four screws (spun down) that secure the grille.

-at the bottom of the bumper, unscrew the seven screws (spun up) that secure the engine protection and fender liner.

-turn the wheels to the side.

-in the wheel wells, unscrew six screws on each side that secure the fender liner (front).

-move the fenders to the side.

-for the fender liner, unscrew one screw on each side (spun down) that attach the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper forward (look behind the wires and hoses).

-disconnect electrical connectors.

-(if any) disconnect the headlight washer hoses.

Rear bumper

-open the trunk lid.

-in the wheel wells, unscrew four screws on each side that secure the fender liner (rear).

-move the fender liner to the side and unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.

-at the bottom of the bumper unscrew six whists (spun up).

-we release the latches in the wings and under the rear lights (pull the corners of the bumper towards you).

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors.