-
-
-
Front bumper
Depending on the model year and version of the attachment may vary slightly.
-open the hood and Unscrew one screw on each side near the headlights (spun down).
-Unscrew the wheel to the left or right side, depending on which side of the bed will be dismantled.
-wheel arches Unscrew the screws that attach the fender liner to the bumper.
-move the wing flaps to the side and Unscrew one screw on each side.
-at the bottom, take out the caps and Unscrew the screws (inserted from the bottom up).
-pulls the bumper forward from the rails.
-remove the connectors from the fog lights (if any).
-remove connector from the PDC (if any).
Rear bumper
The bumper is removed along with the mud flaps.
-in the boot remove the side trim (you need to access the rear part of the rear lights).
-under coverings Unscrew the nuts and remove the tail lights.
-Unscrew the screws under the rear lights.
-Unscrew the screws and take out the caps at the bottom (spun up).
-wheel arches Unscrew the screws.
-at the bottom, take out the caps (inserted from the bottom up).
-with the assistant pulls the bumper from the guides themselves.
-remove connector from the PDC (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español