Skoda Superb II (B6) (2008-2015)
Front bumper
Depending on the model year and version of the attachment may vary slightly.
-under the hood, above the grille, remove the caps and remove the covers.
-near the headlight Unscrew one screw on each side (twisted from top to bottom) that secure the grille.
-take out the caps on the perimeter in the lower part (inserted from the bottom up).
-Unscrew the wheel to the left or right side, depending on which side will parse the first.
-wheel arches Unscrew the screws that attach the fender liner.
-move the wing flaps to the side and Unscrew two screws on each side (spun upwards) holding the corners to the wings.
-near the fog lights, remove the grille (mounted on the latches).
-under grilles Unscrew one screw on each side.
-pulls the bumper from the guides themselves.
-remove connector from the PDC (if any).
-if you have fog lights, remove the connector.
-if you have headlight washers, disconnect the hose and plug the cap to the reservoir was leaking fluid.
Rear bumper
Depending on the model year and version of the attachment may vary slightly.
-open the tailgate and Unscrew two screws on each side that secure the tail lights.
-remove the rear lights by the movement itself (opposite side of the lights just snapped).
-Unscrew one nut on each side under the taillights and take out the caps.
-Unscrew the screws at the bottom (spun up).
-Unscrew the screws in the wheel arches, which attach the wheel arch liners (to remove the wheels, loosen the ratchet with a nozzle).
-move the wing flaps to the side and take out one screw on each side (inserted from the bottom up).
-with the assistant pulls the bumper from the guides themselves.
-remove connector from the PDC (if any).
-remove the electrical connector license plate light.
How to remove front and rear bumper SKODA SUPERB (2001-2008)
How to remove front and rear bumper SKODA SUPERB 3 (2015+)