Front bumper

-open the hood.

-under the hood take out the caps and Unscrew the screws that secure the top.

-around the bottom part, Unscrew two screws and remove seven pistons (twisted and inserted from the bottom up).

-depending on what direction we will analyze wrenched the wheel to the side.

-wheel arches Unscrew two screws on each side and removed the fender liner.

-we release the latch in the wings (pull the corners themselves).

-release the clips under the headlights.

-with the assistant pulls the bumper forward (don't want to break the wires and hoses).

-remove the connectors from the fog lights (if any).

-(if any) disconnected hoses to the washer (can leak fluid).

front bumper mounting scheme Acura RDX

front bumper mounting scheme Acura RDX

front bumper mounting scheme Acura RDX

Rear bumper

-open the trunk lid.

-in the opening of the trunk take out the plugs and Unscrew under them two screws on each side.

-take out four of the pistons (inserted from the bottom up) at the bottom.

-in the wheel wells, Unscrew the screws holding the wheel arches and bumper corners to the wings.

-we release the latch in the wings (pull the corners themselves).

-release the clips under the rear lights and opening boot.

-with the assistant gently pulls the back bumper (don't want to break the wires).

-remove the connectors from the equipment (if any).

rear bumper mounting scheme Acura RDX

rear bumper mounting scheme Acura RDX

rear bumper mounting scheme Acura RDX