Front bumper

assistant is helpful when removing and installing front bumper

-be careful not to scratch the front bumper and the body

-Unscrew the bolts of the bumper on each side and bolts to the bottom of the skirt

-move the inner fender, then remove the nuts attaching the bumper and the mounting bolts from inside the front wing on each side

-lift and remove the front bumper

-disconnect the wires and hoses

-installation is in reverse order

front bumper mounting scheme Acura NSX

Rear bumper

⇒Tips for removing bumpers and how to avoid breaking anything..⇐

-remove the trim panel trunk floor forward and Unscrew the mounting nuts of the bumper

-Unscrew the mounting nuts of the bumper on each side under the boot floor

-move the fender liner

-Unscrew the bolts under the caps on the inside of the rear wing on each side

-Unscrew the mounting nuts of the bumper on each side

-remove the rear bumper by sliding it back

rear bumper mounting scheme Acura NSX