Depending on the year the site of attachment may vary slightly.

Front bumper

-take out the two clips that secure the upper part.

-Unscrew the two screws and take out the four clips around the perimeter of the bottom.

-wrenched the wheel to the side.

-wheel arches Unscrew two screws on each side and removed the fender liner.

-move the wing flaps to the side and  Unscrew one screw on each side that attach the angles to the wings.

- we release the latch in the wings (pull the corners themselves).

-release the clips under the headlights (presses down and forward).

-with the assistant pulls the bumper forward (don't want to break the wires and hoses).

-remove the connectors from the fog lights (if any).

front bumper mounting scheme Acura TL (2004-2008)

front bumper mounting scheme Acura TL (2004-2008)

front bumper mounting scheme Acura TL (2004-2008)

Rear bumper

⇒Tips for removing bumpers and how to avoid breaking anything..⇐

-open the trunk lid.

-in the opening of the trunk take out the plugs and Unscrew under them two screws.

-from the bottom pulls out six rivets (inserted from the bottom up).

-wheel arches Unscrew two screws on each side and removed the fender liner.

-move the wing flaps to the side and Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners themselves).

-release the clips under the rear lights and opening boot.

-with the assistant gently pulls the back bumper (don't want to break the wires).

-remove the connectors from the sensors (if any).

rear bumper mounting scheme Acura TL (2004-2008)

rear bumper mounting scheme Acura TL (2004-2008)

rear bumper mounting scheme Acura TL (2004-2008)

 

How to remove front and rear bumper Acura TL (Honda Inspire) (1998-2003)

How to remove front and rear bumper Acura TL (2008-2014)