Depending on the year the site of attachment may vary slightly.

Front bumper

-open the hood.

-under the hood take out the eight clips that secure the trim over the grille and the top part.

-around the bottom part pulls out twelve rivets (inserted from the bottom up).

-wrenched the wheel (depending on which side we understand).

-wheel arches Unscrew one screw on each side that attach the angles to the wings.

-tear the latch in the wings (pull the corners themselves).

-release the clips under the headlights (pull back on the angle and pull forward).

-with the assistant pulls the bumper forward (don't want to break the wires).

-remove the electrical connectors.

front bumper mounting scheme Acura TSX (2008-2014)

front bumper mounting scheme Acura TSX (2008-2014)

front bumper mounting scheme Acura TSX (2008-2014)

front bumper mounting scheme Acura TSX (2008-2014)

Rear bumper

-open the trunk lid.

-in the opening of the trunk pulls out two plugs.

-under the plugs, Unscrew the screws that secure the top.

-around the bottom part pulls out two pistons and Unscrew the four screws (twisted and inserted from the bottom up).

-wheel arches Unscrew two screws on each side (so as not to remove wheel remove better ratchet with a nozzle) that attach the fender liner.

-move the wing flaps to the side and Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-we release the latch in the wings (take a corner and pull on yourself).

-we release two latches on each side under the rear lights.

-tear the latch in the opening of the trunk (pull back).

-with the assistant gently pulls the back bumper (don't want to break the wires).

-remove the connectors from the equipment (if any).

rear bumper mounting scheme Acura TSX (2008-2014)

rear bumper mounting scheme Acura TSX (2008-2014)

rear bumper mounting scheme Acura TSX (2008-2014)

rear bumper mounting scheme Acura TSX (2008-2014)