How to remove front and rear bumper Mercedes Vito/ Viano V-Class W447

Depending on the year and configuration of the attachment locations can vary.

Front bumper

-open the hood.

-under the hood, Unscrew the two screws and take out the four clips.

-take out the four piston and Unscrew the three screws in the bottom of the (twisted and inserted from the bottom up).

-wrenched the wheel to the side.

-wheel arches take out two pistons on each side and removed the wheel arches (the front part).

-for wheel arch liners Unscrew one screw on each side (twisted upside down) holding the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners themselves).

-with the assistant pulls the bumper forward (look for wires).

-switched the hoses to the headlight washers (if any).

-release the connectors for fog lights and temperature sensor (if any).

Rear bumper

-open the trunk lid.

-on the perimeter in the opening of the trunk, Unscrew the screws.

-Unscrew the screws and take out the rivets that attach the lower part.

-wheel arches take out the caps and removed the wheel arches (rear).

-the fender liner, Unscrew the screws holding the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners themselves).

-with the assistant pulls the bumper backwards (look for wires).

-snap together the connectors of the equipment (if any).

How to remove front and rear bumper Mercedes Vito V-Class W638

How to remove front and rear bumper Mercedes Vito/ Viano V-Class W639