How to remove front and rear bumper Mercedes Citan W415

Front bumper

-open the hood.

-under the hood, Unscrew the screws, release the clips and remove the grille.

-under the grille, Unscrew the two screws and release the clips that secure the upper part.

-from the bottom Unscrew the screws (spun upwards) holding the bottom of the bumper.

-depending on which side we will disassemble, wrenched the wheel.

-wheel arches Unscrew the screws that attach the fender liner.

-for wheel arch liners Unscrew one screw on each side (twisted upside down) holding the corners of the bumper to the wings.

-we release the latch in the wings (ha pull the corners themselves).

-with the assistant pulls the bumper forward (don't want to break the wires).

-remove the fog lamp connectors (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, Unscrew the screws and remove the tail lights.

-Unscrew two screws each side and remove the decorative covers (between the rear lights and bumper).

-in the opening of the trunk, Unscrew the screws that secure the top bumper.

-Unscrew the screws and take out the rivets that attach the lower part.

-wheel arches Unscrew two screws on each side that secure the wheel arches and corners of the bumper.

-we release the latch in the wings (pull the corners themselves).

-with the assistant pulls the bumper backwards (look for wires).

-snap together the connectors of electrical equipment.