Chrysler Cirrus (Stratus) (1994-2000)

Front bumper

-open the hood.

-under the hood take out the caps (inserted from top to bottom) that secure the upper part of the bumper and grille.

-on the perimeter of the lower part we take out the caps.

-turn the wheels left or right, depending on which side you will disassemble.

-in the wheel wells, unscrew three screws on each side that secure the fender liner.

-for the fender liner, unscrew the screws (spun up) that secure the corners of the bumper to the wings.

-with an assistant, pull the bumper towards you from the guides in the wings (look for the wires).

-remove connectors from electrical equipment (if any).

Chrysler Cirrus (Stratus) front bumper mounting scheme (1994-2000)

 

Rear bumper

⇒Tips for removing bumpers and how to avoid breaking anything..⇐

-open the trunk lid.

-in the opening of the trunk, Unscrew the four screws.

-remove the rear lights.

-under the rear lights take out the caps.

-wheel arches unscrew three screws on each side.

-unscrew the screws that secure the sides of the bumper to the wings.

-with an assistant, pull the bumper back from the guides in the wings (look for the wires).

-disconnect electrical connectors (if any).

rear bumper attachment points Chrysler Cirrus (Stratus) (1994-2000)

Chrysler Cirrus (Stratus) rear bumper mounting scheme (1994-2000)