How to remove front and rear bumper Chrysler 200 (2010-2014)

Chrysler 200 I (Lancia Flavia) (2010-2014)

Depending on the year of release of the attachment can vary.

Front bumper

-open the hood.

-under the hood, unscrew the screws and release the latches.

-unscrew the screws and take out the caps on the perimeter at the bottom.

-wrenched the wheel left or right, depending on which side of the bed will disassemble.

-in the wheel wells, unscrew the screws and peel the fender liner.

-for wheel arch liners unscrew one screw on each side that attach the angles to the wings.

-with the assistant release the latch and pulls the bumper from the guides themselves.

-remove the connectors from the equipment (if any).

Rear bumper

-in the wheel wells, unscrew the screws holding the wheel arch liners (to remove the wheels, use a ratchet with a nozzle).

-attach the fender liner to the side and unscrew the screws holding the corners of the bumper to the wings (spun up).

-on the perimeter in the bottom part unscrew the screws (spun up).

-with the assistant release the latch in the wings, behind the rear lights and opening boot.

-pulls the bumper itself.

-remove the connectors from the equipment (if any).

How to remove front and rear bumper Chrysler 200 (2015-2017)