Depending on the year of manufacture, the attachment points may differ slightly.
Front bumper
-open the hood.
-under the hood, take out twelve caps and remove the plastic panel (overlay).
-under the panel, take out the caps and unscrew the six screws that secure the radiator grill.
-Unscrew the screws along the perimeter of the lower part of the bumper (twisted from bottom to top).
-turn the wheels to the side.
-in the wheel arches, Unscrew the four screws on each side that secure the wheel arch liners (front part).
-we move the wheel arch liners to the side and unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the fenders.
-release the latches in the fenders (pull the corners of the bumper towards you) and under the headlights.
-with an assistant, we pull the bumper forward (look behind the wires and hoses).
-disconnect the connectors of the electrical equipment (if any).
- (if any) disconnect the headlight washer hoses.
Rear bumper
-open the trunk lid.
-in the opening of the trunk, Unscrew the two screws.
-Unscrew two screws on each side and remove the taillights by ourselves (they are held on the latches).
-under the rear lights, take out the caps.
-Unscrew eleven screws along the perimeter of the lower part (twisted from bottom to top).
-in the wheel arches, Unscrew the four screws on each side that secure the wheel arch liners (rear part).
-behind the wheel arch liners, Unscrew one screw at a time (twisted from bottom to top) that secure the corners of the bumper to the fenders.
-release the latches in the wings (pull the corners of the bumper towards you)
-with an assistant, we pull the bumper back (look behind the wires).
-we disconnect the connectors of the electrical equipment.
How to remove front and rear bumper Chrysler Pacifica (2003-2008)