Infiniti QX4 (1996-2003) bumper removal.

Depending on the year of manufacture, the mounting locations may vary.

Front bumper

-open the hood.

-release it from the clamps and remove the radiator grille.

-we take out the five pistons (inserted from top to bottom) and unscrew the two screws (twisted from bottom to top) that secure the front bumper to the metal amplifier.

-from the bottom, unscrew the six screws and take out the two pistons that secure the lower part.

-turn the wheels to the side.

-in the wheel arches we release the fender liners (front part).

-move the fender liners to the side and Unscrew the screws that secure the corners to the wings.

-release the latches under the headlights (pull towards yourself).

-with an assistant, carefully pull the bumper forward (watch the wires).

-we release the connectors of the fog lights and other electrical equipment (if any).

Rear bumper

-open the trunk lid.

-in the trunk opening we take out the six pistons that secure the upper part of the rear bumper.

-from the bottom side, unscrew the six screws (twisted from bottom to top) that secure the lower part.

-in the wheel arches, unscrew the screws that secure the mudguards and fender liners (rear part).

-move the fender liners to the side and unscrew the screws that secure the corners to the wings.

-with an assistant, pull the bumper back (make sure not to break the wires).

-disconnect the connectors of the electrical equipment (if any).