Infiniti I30 / I35 (1999-2004) bumper removal.

Front bumper

-open the hood.

-under the hood we take out the four pistons (inserted from top to bottom) that secure the upper part of the front bumper.

-from the bottom side, unscrew the twelve screws (twisted from bottom to top) that secure the lower part).

-turn the wheels to the side.

-in the wheel arches we release the fender liners (front part).

-move the fender liners to the side and Unscrew two screws on each side (twisted from bottom to top) that secure the sides to the wings.

-with an assistant, release the bumper from the latches and carefully pull it forward (watch the wires).

-remove the electrical connectors (if any).

Rear bumper

-open the trunk lid.

-in the trunk we release the side trims.

-behind the casings, unscrew three nuts on each side, release them from the clamps and remove the rear lights.

-under the rear lights, pull out one piston on each side.

-in the inner part of the wings, unscrew the four nuts and four screws.

-from the bottom, remove the screws that secure the lower part.

-in the wheel arches, unscrew the screws and release the fender liners (rear part).

-move the fender liners to the side and unscrew one screw on each side (twisted from bottom to top) that secure the corners to the wings.

-release the latches in the trunk opening.

-with an assistant, pull the bumper back (watch the wires).

- disconnect the connectors of the electrical equipment (if any).