Depending on the year of manufacture, the mounting locations may vary slightly.
-open the hood.
-under the hood, take out two pistons and unscrew the six screws that secure the upper part of the front bumper.
-at the bottom of the bumper we take out two pistons that secure the arch lining and eleven pistons that secure the protection of the engine compartment.
-turn the wheels to the side.
-we release the front part of the arch linings (they are held on by latches, we pull them towards us from the bottom up).
-in the wheel arches, pull out three pistons on each side and release the fender liners (front part).
-behind the fender liners, unscrew one screw from each that secures the sides to the wings.
-release the latches in the wings (pull the corners yourself).
-release the latches under the headlights.
-with an assistant, carefully pull the bumper forward (watch the wires).
-on the right side of the movement we disconnect the two electrical connectors.
-disconnect the fog lamp connectors.
-open the trunk lid.
-in the side trims of the trunk, open the plugs and release the connectors for the rear lights.
-remove the covers near the rear lights (they are held on by latches).
-behind the trims, unscrew two screws on each side, release the clamps (indicated by blue arrows) and remove the rear lights.
-under the rear lights, pull out three pistons on each side.
-unscrew the screws and take out the pistons (twisted and inserted from bottom to top) at the bottom of the rear bumper.
-we release the arch lining (the back part, held on by latches).
-in the wheel arches we take out the pistons and release the fender liners (rear part).
-behind the fender liners, Unscrew one screw on each side that secures the corners to the wings.
-we free the decorative elements of the exhaust pipes.
-release the latches in the wings (pull the corners toward you).
-release the latches in the trunk opening.
-with an assistant, pull the bumper back (watch the wires).
- disconnect the connectors of the electrical equipment.