-
-
-
Front bumper
-open the hood.
-under the hood, take out the clips that secure the grille and the upper bumper section.
-on both sides of the lower and pull out the caps (inserted from the bottom up) and release the lower part of the inner fender.
-in the resulting opening, remove the connectors from the fog lights (if equipped)
-wrenched the wheel depending on which side we understand.
-wheel arches, peel the fender liner.
-Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-take out the caps (inserted from the bottom up) around the perimeter of the bottom.
-with the assistant release the latch in the wings and under the headlights and gently pulls the bumper forward.
Rear bumper
-open the boot lid (rear door).
Sedan:
-out of the trunk, behind the panels, Unscrew the nuts that attach the rear lights.
Universal:
-in the opening of the trunk Unscrew two screws on each side that secure the tail lights.
-remove tail lights.
-around the bottom part and pull out the caps (inserted from the bottom up).
-wheel arches, peel the fender liner.
-for wheel arch liners, take out the caps holding the corners of the bumper to the wings.
-with an assistant, carefully release the clips in the wings and under the tail lamps.
-pulls the bumper back.
-snap together the connectors of the equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español